Selection Guides
How to choose the right element, media, micron rating, and housing for your application, with catalog-accurate specifications.
Bag Filters vs Cartridge Filters: Which Do You Need?
Flow rate, solids load, micron rating, and cost per change-out: the four numbers that decide between a bag filter and a cartridge filter, with a full comparison table.
Read the guideIndustrial Liquid Filter Bags: Types, Sizes, and Selection
Felt versus mesh construction, absolute versus nominal micron ratings, the four standard bag sizes, and a five-step checklist for specifying the right bag.
Read the guideHow Mismatched Filtration Quietly Raises Your Annual Cost
Four ways a filtration system mismatched to its duty raises annual cost, even when each individual filter is performing exactly to its own specification.
Read the guideHow Many Microns Should Your Water Filter Be?
The micron range for sediment removal, drinking water, RO protection, and sterilizing-grade duty, and why finer is not always the right answer.
Read the guideHow to Choose Filter Cartridges for Electroplating Baths
Sizing a plating bath filtration system, comparing string wound, melt blown, pleated, and bag filters, and the factors that decide which cartridge is right.
Read the guideString Wound vs Pleated: Which Filter Cartridge Fits Your Need
String wound depth filtration compared with pleated surface filtration on dirt-holding capacity, flow rate, and lifespan, with the application each one suits best.
Read the guideA Quick Guide to Melt Blown Cartridge Filters
Sizing, chemical compatibility, and the signals that say a melt blown cartridge needs replacing, in a short practical reference.
Read the guideSediment Filter Cartridges: The Four Types and How to Pick One
String wound, melt blown, pleated, and high-flow sediment filter cartridges compared, with how to choose between them and when to replace one.
Read the guideWhat Actually Varies Across a Pleated Filter Range
Media material, micron rating, and certification are the three variables that actually differ across a pleated cartridge range.
Read the guideFive Things to Check When Choosing a String Wound Cartridge Supplier
Five things to check about a string wound cartridge supplier, beyond price, before committing to them for a recurring order.
Read the guideWhy Cartridges Clog Early, and How to Diagnose It
A diagnostic sequence for early cartridge clogging: check the solids characterisation, the media type, and the differential pressure rating before reordering the same part.
Read the guideEight Things to Check Before Buying a String Wound Cartridge
The micron rating scale, winding quality, temperature limits, and the manufacturing checks worth asking a supplier for before buying a string wound cartridge.
Read the guideWhat to Check Before Switching Cartridge Filter Suppliers
Media type, micron rating basis, seal geometry, and housing fit to check before switching cartridge filter, filter bag, or housing suppliers.
Read the guideWhy Companies Are Moving Away from Resin Bonded Cartridge Filters
Resin bonded cartridge filters bind fibres with phenolic resin, which can migrate into the filtrate; here is what to check before specifying an alternative.
Read the guideThe Cartridge Properties That Actually Decide Performance
Beta ratio, weld-free construction, honeycomb winding, and temperature rating explained: the properties that decide whether a cartridge fits a challenging duty.
Read the guideuPVC Filter Housings for Corrosive Liquids: What the Material Changes
What unplasticized PVC construction changes about a filter housing for seawater, brine, and electroplating duty, and where it fits against metal alternatives.
Read the guideString Wound vs Melt Blown: Choosing the Right Depth Cartridge
Structure, dirt-holding capacity, micron range, and temperature limits compared for string wound and melt blown depth cartridges.
Read the guideFRP Filter Housings: What Non-Corrosive Construction Actually Buys You
How fibreglass-reinforced plastic housing construction compares with stainless steel for seawater and other corrosive duty, on corrosion resistance, weight, and cost.
Read the guideTell us what you are filtering. We will protect what comes after it.
Send your application details and our engineers will respond with a specification, not a sales pitch.